You are here

Automotive & Transportation

High-Performance Solutions Through Expert Automotive Material Selection & Converting

Fabrico has many years of experience in the automotive industry, providing automotive manufacturing materials for applications such as masking for truck headlights, automotive gasket materials, electrical insulation materialsthermal management materials, and die-cut materials that attach the carpeting in an automobile. Fabrico is involved in addressing requirements for automotive applications that require expert material selection and converting services to provide high-performance solutions.

Electrical Insulation for High-Performance Motors in HEVs and EVs

As new high-performance technologies become available for hybrid electric vehicles (HEVs) and fully electric vehicles (EVs), Fabrico provides electrical insulating expertise and materials to manage these high-temperature environments. Fabrico can help design engineers working with HEVs and EVs to develop innovative solutions for electrical insulation, electrical conductivity, EMI/RFI shieldingheat dissipation, and cushioning for vibration absorption.

Insulation/Thermal Management in Batteries

The use of large lithium-ion batteries is gaining acceptance in automotive applications. Fabrico can provide insulation and thermal management expertise. For example, Fabrico can deliver die-cut, insulating foam to cushion and protect the battery, hot melt adhesives for potting, and silicon sponges to improve heat dissipation – a key concern of lithium-ion batteries.


For exterior panels used in truck trailers, ambulances, and recreational vehicles, thin bonding acrylic foam tapes, and structural adhesives and sealants are effective alternatives that eliminate the rough surfaces of welds and the rattling and panel flexing of metal fasteners. Logos, graphics, and trim provide other opportunities where adhesives provide aesthetic as well as functional advantages over metal joining techniques. The interior of automobiles is another area where adhesives are playing a major role. For example, thin bonding tapes can invisibly adhere window switch plates and other plastic trim pieces to hard-to-adhere surfaces, such as vinyl substrates.

Vibration Dampening

Material requirements for applications include conformability to contours of the vehicle body, with good adhesion to oily metal; compatibility with paint bake cycles; weight reduction; and corrosion resistance. Applications include vibration dampening foam and vibration dampening tape. Fabrico has the application knowledge, materials selection expertise, and converting capability to die-cut materials into the shapes required, dictated by the location in the vehicle, whether on the dash, in the wheelhouse, or in the doors.


Taping requirements for vehicles vary depending on the location. Harness tapes in the engine room must be flame retardant and heat resistant, while other locations, such as external body locations, require weather-proof taping solutions or adhesive masking materials. Taping for EMI/RFI shielding must have good conductive and adhesion properties.

Surface Protection

Surface protection requirements vary depending on the location in the vehicle. Exterior surfaces require abrasion protection, while interior surface requirements may have special bonding or heat tolerance requirements. The breadth of Fabrico’s materials selection and applications expertise ensure the best design solution for the surface protection requirements of a given project.

Other automotive needs that can be met are:

  • Buzz, squeak, and rattle problems
  • Black-out materials
  • Hole covers
  • Patching
  • Gasketing, sealing, gap filling/hiding
A few automotive materials Fabrico stocks include:
  • 3M acrylic foam tapes for body molding attaching
  • Transfer tapes, double-coated tapes for component attachment
  • BSR tapes
  • Flock tape
  • UHMW tape
  • Polyester and polyethylene tape
  • PORON automotive foam
  • PVC foam, EPDM, EVA, open, close cell foams with or without PSA


Die-cut materials can be supplied in rolls, sheets, pads, or individual pieces with a split back liner or extended tab for easy liner removal.

Fabrico has many years of experience supplying specialty converted materials that meet OEM specifications for Ford, General Motors, Chrysler, Nissan, Toyota, and other auto manufacturers.

General Motors Company: GM6086M GM6098M GM6419M GM 6420M GM2101M GM3802M GM9985941 GM2747M GM277M GM9985332 GM9986080 GM2743M GM6068M GM3602 GM3607 GM3622 GM3634M GM9985578 GM251M GM3807M GM2151M GMP-PE056

Daimler Chrysler: MS-CH26 MS-JZ8-22 MS-AY349 MS-CH612 MS-CH613 MS-AY549 MS-AY511 MS-AY549 MS-AY358 MS-AY512 MS-7921 MS-CH51 MS-AY301 MS-CC255 MS-CC240 MS-CC211

Ford: ESB-M3G123-B ESB-M6G17-A ESB-M3G102 WSS-M2D4961 M-3G220-A M-3G230-A ESA-M4D57-A ESB-M2D304 FMVSS302-98 WSKM4D649A SAE J-18 ASTM D-1056