You are here

Specialty Tapes

Fabrico offers many specialty tapes for a wide variety of applications.  From repulpable tapes to cling films, Fabrico has the specialty tape to meet your application needs.

Fabrico has tapes to meet the custom needs of the printing, paper and packaging markets with our complete inventory of specialty tape products.  We are able to offer these tapes in custom and standard sizes and have many available off the shelf for immediate shipping.

If you are looking for specialty tapes for your next application, Contact Fabrico to learn more about our complete line of specialty tape products.

 

More 
  • 314LT 

    • Proven time reduction when used on the top layer of paper prior to performing flying splices.
    • 100% repulpable.
  • 3M 1000-11 

    • 2-mil vinyl film
    • Wide color selection
    • Includes three colors with both a layflat liner and gray adhesive for excellent hiding power and a transparent film with a layflat liner
    • Pressure-sensitive adhesive
    • Confirms to flat surfaces, with and without rivets, moderate compound curves
    • Permanent film
  • 3M 1000LF-10 

    • 2-mil vinyl film
    • Wide color selection
    • Includes three colors with both a layflat liner and gray adhesive for excellent hiding power and a transparent film with a layflat liner
    • Pressure-sensitive adhesive
    • Confirms to flat surfaces, with and without rivets, moderate compound curves
    • Permanent film
  • 3M 5700 

    • Resists most common solvents, but care must be taken to avoid ketones, esters and chlorinated hydrocarbons which may cause backing to swell or degrade in the intended product appli
    • Avoid using on highly plasticized materials which may result in adhesive softening and subsequent adhesion failure of tape.
    • Best results are attained when applied to a clean, dry surface at temperatures between 60° to 80°F (16° to 27°C).th a silicone adhesive.
  • 3M 5770 

    • Labels remove cleanly and in one piece from most metal and high energy plastics.
    • Facestock is topcoated for thermal transfer printing, and is also suitable for press printing.
    • UL recognized (File MH16411) and CSA accepted (File 99316).
  • 3M 616 

    • Graphic arts
    • Optically transparent, qualified to meet MIL-T-40620A
    • Photo-splicing, film splicing, negative splicing, opaquing, stripping, edging, light blocking, prepass stripping
    • Pin-hole free backing
    • Ruby Red, 1.6 mil UPVC backing
  • 3M 7002 

    • Facestock is ideal for traditional forms of press printing and write-on variable information.
    • Designed to survive autoclaving, ETO and gamma sterilization while adhered to most surfaces.
    • Meets many pharmaceutical industry or manufacturer specifications.
    • 3M™ Performance Paper Label Materials 7000, 7002, 7011, and 7014 utilize a 43# Densified Kraft liner that help improve application accuracy due to excellent liner release consisten
    • Ideal for application rates up to 250 containers per minute.
  • 3M 7025 

    • Adhesive dry ingredients are listed by FDA as indirect food contact additives when used in food packaging with minimum opportunity for exposure. See 21 CFR 175.105.
    • UL recognized (File MH16411). See the UL listings for details.
    • Adhesive offers good UV resistance and excellent adhesion to a wide variety of substrates, including polyolefins.
    • Liner provides easy sheet processing and is designed for the ultimate in layflat. The backside of this liner is not printable.

Pages

×