You are here

Surface Protection

Fabrico provides films and protective tape solutions for temporary and permanent surface protection.  We can provide these materials in rolls or custom die cuts.
Fabrico’s experienced engineering team can guide you to the best material solution for your application. We offer a broad range of protective tapes for indoor and exterior applications to help prevent damage to surfaces and products. Products that offer clean, stain-free removal and eliminate scratches, marring, & UV discoloration.
We stock surface protection products used on:

• Automotive Class A surfaces
• Automotive Mirrors, Automotive Lights
• Dashboard and display
• Consumer Electronics
• Electronic Displays
• Graphics and Signage
• Metals & Metal Fabrication
• Marble Sinks and Countertops
• Carpet Protection
• Kick Plates, Light Switches
• Aerospace Products

Protection Film features:

• Abrasion & Scratch Resistant
• Chemical Resistant
• UV Resistant
• Custom Colors, Tints, Surface Printing
• Custom Shapes, Widths & Lengths
• Custom Perforations in ANY configuration
• Products delivered in rolls, pads, laser cut or die-cut pieces with tabs and split liners

Contact Fabrico for more information.
 

More 
  • 3M 1001 

    • 98% UV protection to keep plastics and fabrics looking like new
    • Cost effective multi-layer construction
    • Meets ASTM E162, ASTM E662, FMVSS-302 and Bombardier SMP 800-C requirements
    • Optically clear and clean peel away with no adhesive residue
    • High clarity construction and glass like appearance
  • 3M 1001MS 

    • Film protects glass from chemical etching agents
    • Durable top-coat layer prevents light scratches caused by installation, wiping, cleaning or abrasion
    • Film can protect plastic surfaces such as polycarbonate and acrylic
    • Resists the effects of outgassing when applied to polycarbonate and acrylic
    • High clarity construction provides glass-like appearance
  • 3M 1002 

    • 98% UV protection to keep plastics and fabrics looking like new
    • Cost effective multi-layer construction
    • Meets ASTM E162, ASTM E662, FMVSS-302 and Bombardier SMP 800-C requirements
    • Optically clear and clean peel away with no adhesive residue
    • High clarity construction and glass like appearance
  • 3M 1002MS 

    • Scotchgard Multi-Layer Protective Film for Glass 1002MS
  • 3M 1004 

    • 98% UV protection to keep plastics and fabrics looking like new
    • Cost effective multi-layer construction
    • Meets ASTM E162, ASTM E662, FMVSS-302 and Bombardier SMP 800-C requirements
    • Optically clear and clean peel away with no adhesive residue
    • High clarity construction and glass like appearance
  • 3M 1004MS 

    • Multi-layer construction reduces total application and removal costs versus single layer protection.
    • Thick polyester film construction prevents typical scratches from affecting layers below.
    • Film protects glass from chemical etching agents such as Bath Etch™ or Armour Etch™.
    • Film on glass and polycarbonate meets ASTM E162, ASTM E662, FMVSS-302 and Bombardier SMP 800-C requirements.
    • Durable top-coat layer prevents light scratches caused by installation, wiping, cleaning or abrasion
    • Resists the effects of outgassing when used on polycarbonate and acrylic.
    • Optimized inter-layer adhesive provides firm, adequate adhesion yet fast and easy removal.
    • High clarity construction provides glass-like appearance.
  • 3M 1614C 

    • Low-tack adhesive removes cleanly after exposure to temperatures up to 300°F (150°C) and is non-staining which helps eliminate the need to rework parts.
    • Transparent backing allows visual inspection without tape removal.
    • Abrasion resistant backing prevents tearing that can occur during the forming process.
  • 3M 1675C 

    • Low-tack adhesive removes cleanly after exposure to temperatures up to 350°F (177°C) and is non-staining/non-corrosive which helps eliminate the need to rework parts.
    • Transparent backing allows visual inspection without tape removal.
    • Abrasion resistant backing prevents tearing that can occur during the forming process.
  • 3M 2104C 

    • Transparent backing allows visual inspection without tape removal.
    • Easy punch characteristics withstand most forming operations where die tolerances are critical which helps save money on scrap, rejects and reworks.
    • Acrylic adhesive is non-corrosive and non-staining.

Pages

×